Using the Camera Cycler
If you are using multiple cameras, you will need to enable the camera cycler to upload images from all of the cameras. You cannot upload an image from each camera at the same time. Instead, the camera cycler will cycle through all of your cameras, sending one image from the selected camera, then moving on to the next camera on the list.
To set up the camera cycler, click on the 
button, the check the "Use Camera Cycler." Then click on the settings button to select how you will cycle the cameras.
To add a camera to the cycle, click on the 
button. Now when you use FTP, the camera cycler will go down the list of cameras, uploading 1 picture from each camera on the list, then repeat the process.
The Interval box will set how fast your images are uploaded.
Rate This Article
You must be logged in to rate articles.
